temperature range C55 c to +125 c rated voltage range 20 vdc to 250 vdc capacitance range 220 f to 17,000 f capacitance tolerance 20% leakage current 0.002 cv a, @ 25 c and 5 mins. ripple current multipliers low temperature characteristics impedance ratio: z C55 ?c M z +25 ?c @ 120 hz 10 (5 - 60 vdc) 2 (61 - 250 vdc) dc life test 5000 h at rated voltage &125 c d capacitance +/- 15% less than or equal to 60 vdc d capacitance +/- 10% greater than 60 vdc esr 200% of limit dcl 100% of limit shelf life test 500 h at 125 c capacitance 100% of limit esr 100% of limit dcl 100% of limit vibration mounting: vibration capability is dependent upon mounting restraint. the optional welded mounting tabs, alone, are not capable of sustaining the high vibration levels. to achieve the high vibration levels as published on right, additional mounting restraint is required. mil-std-202, meth. 204, sine swept, iec 60068-2-6 standard mlsg flatpack: 10g type hvmlsg flatpack 1.5 and 2.0 case length, 50g type hvmlsg flatpack 2.5 and 3.0 case length, 30g with over 5000 hrs of dc life at rated voltage, 125c, type mlsg is our longest life steel-cased flatpack capacitor. for systems requiring the highest life expectancy, type mlsg is the best choice. enhance the reliability of your system even further by specifying type hrmlsg for a mil-level burn-in. this series is also available in a high vibration package up to 50gs by specifying type hvmlsg. highlights - longest life - stainless-steel case - withstands more than 80,000 feet altitude - type hv up to 50g - type hr, high reliability specifcations cdm cornell dubilier ? 140 technology place ? liberty, sc 29657 ? phone: (864)843-2277 ? fax: (864)843-3800 type mlsg C flatpack, 5000 hr@125 oc, aluminum electrolytic available with high vibration and high reliability options case temperature ambient temperature, no heatsink 45 c 55 c 65 c 75 c 85 c 95 c 105 c 115 c 125 c 0.63 0.58 0.54 0.49 0.44 0.38 0.31 0.22 0.00 45 c 55 c 65 c 75 c 85 c 95 c 105 c 115 c 125 c 1.41 1.32 1.22 1.12 1.00 0.87 0.71 0.50 0.00 frequency 50 hz 60 hz 120 hz 360 hz 1 khz 5 khz 10 khz & up 5 to 40 v 0.95 0.96 1.00 1.03 1.04 1.04 1.04 60 to 250 v 0.80 0.84 1.00 1.18 1.25 1.30 1.30
cdm cornell dubilier ? 140 technology place ? liberty, sc 29657 ? phone: (864)843-2277 ? fax: (864)843-3800 type mlsg C flatpack, 5000 hr@125 oc, aluminum electrolytic available with high vibration and high reliability options vibration test level the specimens, while deenergized or operating under the load conditions specifed, shall be subjected to the vibration amplitude, frequency range, and duration specifed for each case size. amplitude the specimens shall be subjected to a simple harmonic motion having an amplitude of either 0.06-inch double amplitude (maximum total excursion) or peak level specifed above (xxg peak), whichever is less. the tolerance on vibration amplitude shall be 10 percent. frequency range the vibration frequency shall be varied logarithmically between the approximate limits of 10 to 2,000 hz. sweep time and duration the entire frequency range of 10 to 2,000 hz and return to 10 hz shall be traversed in 20 minutes. this cycle shall be performed 12 times in each of three mutually perpendicular directions (total of 36 times), so that the motion shall be applied for a total period of approximately 12 hours. interruptions are permitted provided the requirements for rate of change and test duration are met. high reliability test/burn-in established reliability capacitors shall be subjected to a minimum of 100 percent of the dc rated voltage at 85 oc for 48 hours minimum but not to exceed 96 hours. during this test, capacitors shall be adequately protected against temporary voltage surges of 10 percent or more of the test voltage. after burn-in, the capacitors shall be returned to room ambient conditions and the dc leakage, capacitance, and esr shall be measured with respect to specifed limits. thermal resistance esl 30 nh measured 1/4 from case at 1 mhz weight case ek 48g typical case ea 63g typical case eh 78g typical case eb 93g typical terminals 18 awg copper wire with 60/40 tin-lead electroplate, 20 amps max ripple current capability the ripple current capability is set by the maximum permissible internal core temperature, 125 oc. air cooled the ripple currents in the ratings tables are for 85 oc case temperatures. for air temperatures without a heatsink use the multipliers ambient temperature, no heatsink. heatsink cooled temperature rise from the internal hottest spot, the core, to ambient air is ?t = i 2 (esr)(cc + ca), recommended max t of 30 oc where cc is the thermal resistance from core to case and ca from case to ambient. to calculate maximum ripple capability with the mls attached to a heatsink use the maximum core temperature and the values for cc. example as an illustration, suppose you operate an insulated mlsg332m060eb1c in 65 oc air and attach it to a commercial heatsink with a free-air thermal resistance of 2.7 oc/w. use a good thermal grease between the mls and the heatsink, and the total thermal resistance is 2.3 + 2.2 or 4.5 oc/w. the power which would heat the core to 125 c is (125 - 65)/4.5 or 13.3 w. for an esr of 31 m, 13.3 w equates to a ripple current of 20.7 a, however, the wire leads are rated for only 20 a. large sides heatsinked case length 1.5" 2.0" 3.0" insulation oc/w oc/w oc/w one none 4.3 3.1 2.0 polyester 4.7 3.4 2.2 both none 2.8 2.0 1.3 polyester 3.0 2.2 1.4
? ? l +0.375 0.03 0.188 0.01 0.156 dia 0.01 0.375 0.01 l 0.02 1.5 min 0.156 0.01 slot 0.040 dia, 18 awg leads (typ) 1.00 0.01 1.75 0.01 .030 .036 0.50 max + part numbering system hv hr mlsg 821 m 200 eb 0 a optional optional type capacitance tolerance rated voltage case code insulation mounting style high vibration high reliability mlsg 821=820 f 102 = 1000 f m=20% vdc ek, l=1.5 in. ea, l=2.0 in. eh, l=2.5 in. eb, l=3.0 in. * other sizes available 0 = bare can 1 = polyester a = mounting tabs c = two leads/no tabs d = hook leads/tabs * other mounting tab options available style a: mounting tabs outline drawings type mlsg C flatpack, 5000 hr@125 oc, aluminum electrolytic available with high vibration and high reliability options cdm cornell dubilier ? 140 technology place ? liberty, sc 29657 ? phone: (864)843-2277 ? fax: (864)843-3800 style d: hook leads style c: no tabs mounting tabs are welded to the case. ? ? l +0.375 0.03 0.188 0.01 0.156 dia 0.01 0.375 0.01 l 0.02 1.5 min 0.156 0.01 slot 0.040 dia, 18 awg leads (typ) 1.00 0.01 1.75 0.01 .030 .036 0.50 max + standard type mlsg type hv, rilled construction examples: standard mlsg: mlsg821m200eb0c high reliability: hrmlsg821m200eb0c high vibration: hvmlsg821m200eb0c high reliability, high vibration: hvhrmlsg821m200eb0c l+.375 0.03 .188.010 .156.01 .375.01 l.02 1.5 min .015 max fill hole cover 1.00.01 1.750.01 .156.01 slot 0.50 max .036 .030 0.040 dia, 18 awg leads (typ) optional body groove for high vibration version l.02 1.5 min 1.00.01 1.75.01 .015 max fill hole cover .04 dia, 18 awg leads (typ) .50 max optional body groove for high vibration version l+.375 0.03 .188.01 .375.01 .015 max fill hole cover l.02 .156.01 1.00.01 1.75.01 .156.01 slot 0.040 dia, 18 awg leads (typ) .50 max .26.01 .175.01 dia .036 .030 optional body groove for high vibration version
cdm cornell dubilier ? 140 technology place ? liberty, sc 29657 ? phone: (864)843-2277 ? fax: (864)843-3800 ratings type mlsg C flatpack, 5000 hr@125 oc, aluminum electrolytic esr max 25 c (m) 120 hz ripple (a) case @ 85c 120 hz voltage cap (f) catalog part number 20 khz 20 khz length (inches) 20 vdc @ 125 c 24 vdc @ 105 c 30 vdc surge @ 25 c 6,800 mlsg682m020ek0c 84 69 11 12.2 1.5 17,000 mlsg173m020eb0a 33 27 17.6 19.5 3.0 40 vdc @ 125 c 48 vdc @ 105 c 60 vdc surge @ 25 c 4,400 mlsg442m040ek0c 97 70 10.3 12.1 1.5 6,300 MLSG632M040EA0A 62 46 12.9 15 2.0 10,000 mlsg103m040eb0c 36 27 16.9 19.5 3.0 60 vdc @ 125 c 65 vdc @ 105 c 90 vdc surge @ 25 c 1,500 mlsg152m060ek0a 106 77 9.8 11.5 1.5 2,100 mlsg212m060ea0a 72 52 11.9 14.1 2.0 3,300 mlsg332m060eb0c 44 31 15.3 18.2 3.0 100 vdc @ 125 c 120 vdc @ 105 c 150 vdc surge @ 25 c 500 mlsg501m100ek0a 355 248 5.4 6.4 1.5 770 mlsg771m100ea0c 238 166 6.6 7.8 2.0 1,300 mlsg132m100eb0d 143 100 8.5 10.1 3.0 150 vdc @ 125 c 180 vdc @ 105 c 225 vdc surge @ 25 c 360 mlsg361m150ek1a 388 253 5.1 6.4 1.5 540 mlsg541m150ea1a 261 168 6.3 7.8 2.0 900 mlsg901m150eb0c 158 100 8.1 10.1 3.0 200 vdc @ 125 c 250 vdc @ 105 c 300 vdc surge @ 25 c 280 mlsg281m200ek1a 426 258 4.9 6.2 1.5 400 mlsg401m200ea0a 285 172 6 7.7 2.0 720 mlsg721m200eb0c 172 103 7.7 10 3.0 250 vdc @ 125 c 275 vdc @ 105 c 300 vdc surge @ 25 c 220 mlsg221m250ek0c 597 393 4.1 5.1 1.5 560 mlsg561m250eb0c 240 157 6.5 8.1 3.0 1 10 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 expected operating life, years rated ripple - current multiple type mlsg operating life in years vs ripple current 55 c 65 c 75 c 85 c 95 c 105 115 c 1 10 100 1000 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 expected operating life, kh rated ripple - current multiple type mlsg operating life in kilohours vs ripple current 55 c 65 c 75 c 85 c 95 c 105 115 c typical performance curves
typical performance curves cdm cornell dubilier ? 140 technology place ? liberty, sc 29657 ? phone: (864)843-2277 ? fax: (864)843-3800 type mlsg C flatpack, 5000 hr@125 oc, aluminum electrolytic 0 0.2 0.4 0.6 0.8 1 1.2 10 100 1000 10000 100000 1000000 ratio to 25 c, 120 hz value freq (hz) cap vs. frequency & temp 125 105 85 65 45 25 0 -20 -40 -55 0.1 1.0 10.0 100.0 10 100 1000 10000 100000 1000000 ratio to 25 c, 120 hz value freq (hz) esr vs. frequency & temp 125 105 85 65 45 25 0 -20 -40 -55 0.001 0.01 0.1 1.0 10.0 100.0 10 100 1000 10000 100000 1000000 ratio to 25 c, 120 hz value freq (hz) |z| vs. frequency & temp 125 105 85 65 45 25 0 -20 -40 -55
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required.
|
